Hi,
The chlorine i'm not real concerned about, as you could just let the water sit in a bucket for a day or two before using it and the chlorine would leave the water... but the Total Dissolved Solids is kinda hard... 41mg/l - 90mg/l.... first of all that is translated into 41 ppm - 90 ppm... as 41ppm doesn't seem to be too hard when you rince your media and check your tds... but for water I'd say is too high. MY R/O system makes water at 7-11 ppm... And over time, that too builds up in my pots so I need to rince them or transplant the plants. Distilled water of course is 0 ppm... To be safe, I'd say it might be okay for mexican pings if you water from the top and don't tray water... (It'll rince the pot as you water so It'll never build up in there) But, make sure to sit the water in a bucket for a day or two before using. Also, the PH is a little alkaline... As we know, our plants are on the acidic side of the scale... Not that it is too far off...
So, bottom line. I wouldn't use it. (at all) And I wouldn't recomend you use it either.
And that's my thoughts on that...
Andrew
EDIT: I am in no way, a chemistry/water person... this is just the best I know for who I am. (A cp grower that monitors PPM in the water for my cps and the water that is rinced out of my cps pots.